reversible for left or right swing fits openings up to 90cm wide new width sizes acailable 5mm tempered safet glass with polshed edges INSTALLATION NOTES : Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts using the instruction sheet as a reference. Before...
reversible for left or right swing
fits openings up to 90cm wide
new width sizes acailable
5mm tempered safet glass with polshed edges
INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay out and
identify all parts using the instruction sheet as a reference. Before discarding the carton, check to see
that no small hardware parts have fallen to the bottom of the box. If any parts are damaged or missing,
refer to the descriptions noted in the instructions when contacting your dealer for replacements.
Handle the glass panel(s) carefully and protect the edges.
Please wear safety glasses whenever drilling or cutting. When drilling holes in ceramic tile or marble,
use a center punch and hammer to carefully break the surface glaze so the drill bit can start without
skidding.
To install your Xute Shower Door you will need the following: tape measure, level(s), #2 Phillips
screwdriver, drill, 1/8” & 3/16” High Speed Steel drill bits, hacksaw, pencil, sharp knife or razor blade
and caulking (clear, mildew resistant silicone recommended). Optional tools include a miter box for
cutting metal parts, file, center punch and masking tape. An additional 3/16” Masonry drill bit is
recommended for tiled applications.
The door is best installed with two people.
NOTE: Tempered glass cannot be cut. Although safety tempered glass is very resistant to breakage, the glass can still break if unequal pressure is placed on it during installation. Use caution! In addition, the sharp corners of the pane(s) can damag
